Isn’t it frustrating to find your smart LG TV can’t connect to WiFi when you just want to sit down and relax? This can definitely ruin your day, but the good news is though many users have reported WiFi issues, there are easy steps you can do to fix it!
Turn on WiFi on your LG TV by pressing the gear button on your remote control and going to Network > WiFi Connection. From there, select your WiFi network from the list and enter its password to connect to it.
Also, WiFi connection issues can be resolved by doing a power reset. Unplug your modem/router from the wall and wait for about 60 seconds; do the same with your smart LG TV.
In this post, we’ll show you how to turn on WiFi on LG TVs via proven fixes you can DIY without a remote. Plus, we’ve compiled a list of alternative ways to connect to the internet should conventional ones fail — so read up.
| Difficulty | Easy ●●○○○ |
| Duration | 26 minutes and 10 seconds |
| Number of Fixes | 5 |
| Things You Need | • LG TV • LG TV remote control • Ethernet cable • A working internet connection • A streaming device •A gaming console |
How to Turn On WiFi on Your LG TV
Like any signal, your internet can suffer from a host of issues that weaken or block it from gaining access to your LG TV. But no worries; the step-by-step instructions below should have you covered.
1. Connect to the WiFi network using your LG TV remote.
| Difficulty | Very Easy ●○○○○ |
| Number of Steps | 6 |
| Duration | 25 seconds |
To turn WiFi on your LG TV, all you need to do is follow this quick and easy guide using your TV’s remote control. Since WiFi is a network connection, you can establish the connection with your router through the network settings.
Please note that your router must be turned on and in range for your LG TV to detect and connect to its network. Also, the menu options may vary between LG TV models, so check your unit’s manual or user guide for the network settings.
Follow these steps to connect your LG TV to the WiFi using a remote:
on the remote control to open the options panel on the side of your TV screen.
on your remote control to go to the network settings.
Note: You can also click the Enter key on the on-screen keyboard to proceed with the connection.
Usually, if it’s not the first time you’ve entered the password, the smart TV remembers it. So, all you have to do is press connect.
2. Connect to the WiFi network without your LG TV remote.
| Difficulty | Easy ●●○○○ |
| Number of Steps | 17 |
| Duration | 1 minute and 25 seconds |
Are you wondering how to turn WiFi on your LG TV when you don’t have a remote control or if it’s broken? If yes, you can use alternative accessories instead of the remote control, such as a USB keyboard or the LG ThinQ app.
The ThinQ app is an all-in-one companion software allowing users to control a wide range of WiFi-enabled LG appliances and products. Using this app as a temporary remote control to operate your LG TV using its button controls.
Follow these steps to connect to the WiFi network using the LG ThinQ app:
Note: You can create an LG account for free if you don’t have one yet. Follow the on-screen instructions to do so or just sign in using the other options such as Google or Facebook.
Step 16: Use the remote control buttons on the ThinQ app to operate your LG TV.
Step 17: Follow the previously-discussed instructions for connecting your LG TV to
the WiFi network.
Alternative Way to Turn On WiFi on Your LG TV
LG TVs can connect to a WiFi network using two methods. While connecting over the air through a wireless connection is the most common and convenient practice, it’s also possible to establish a direct connection using an ethernet cable.
In case you’ve forgotten, WiFi is a fairly new way to connect to the internet using radio waves and not wires. Ethernet or wires are the conventional ways you can get connected.
To find out more about this alternative way of turning on the WiFi network on your LG TV, check out the section below.
1. Connect your LG TV to the WiFi network using an ethernet cable.
Aside from connecting over the air, another way to introduce WiFi on LG TV is through a direct wired connection. You can achieve this by plugging in an ethernet cable on the LAN port behind your router and your TV’s back panel.
Believe it or not, using an ethernet cable to connect to your WiFi network is even better than a wireless connection. This is because a wired connection isn’t prone to signal interference the same way a wireless connection is.
So, you get a more stable internet connection less prone to becoming intermittent. In short, it’s a lot more dependable than WiFi.
Alternative Ways to Connect Your LG TV to the Internet
Even if you know how to turn WiFi on your LG TV, sometimes it might not work due to a connectivity issue or a malfunction. In such cases, you can use other methods to connect your TV to the internet.
Below are two methods to access the internet using your LG TV even when it’s unable to connect to your WiFi network. These methods involve using an external device that will connect to the WiFi network instead.
1. Connect your LG TV to the internet using a streaming device.
When you cannot connect your LG TV to a WiFi network, it can still access the internet as long as it’s connected to a streaming device. Granting the streaming device is connected to your WiFi network, you can stream content online.
Examples of streaming devices you can use include the Amazon Fire TV Stick, Chromecast, and Roku TV Stick. FireStick and Chromecast are the two most used streaming devices in the market today.
2. Connect your LG TV to the internet using a gaming console.
Another way for your LG TV to access the internet is through a connection with a gaming console. Gaming consoles such as the PS4, PS5, Nintendo Switch, and Xbox Series X can connect to a WiFi network.
You can stream online content if any of these consoles are connected to your LG TV via an HDMI cable. These gaming consoles can access most streaming services like Netflix, Hulu, Disney+, Amazon Prime Video, and more.
Please note that, unlike the PlayStation and Xbox consoles, the Nintendo Switch has less diverse streaming options.
Turn on WiFi on LG TV: Troubleshooting Guide
As mentioned earlier, your LG TV might be unable to connect to a WiFi network due to a connectivity issue or a malfunction. As such, you must be able to troubleshoot your TV when encountering such issues.
Luckily, we’ve included a quick and easy troubleshooting guide below to help you tackle the most common problems that might cause your LG TV to not connect to a WiFi network.
What to Do if LG TV Can’t Connect to WiFi
If your LG TV isn’t connecting to your router’s WiFi network, either one of these devices is likely to be the root cause of the problem. The most effective way to address this issue would be to troubleshoot your LG TV and router to identify and fix the problem.
You can refer to our list below of proven and tested troubleshooting methods for fixing connectivity issues on LG TVs. These methods include step-by-step instructions to help you get to the bottom of the problem in a jiffy.
1. Power cycle both the LG TV and WiFi router.
The most basic way to troubleshoot an LG TV not connecting to the WiFi network is to reset it via a power cycle. The same thing applies to a WiFi router that’s having trouble connecting to the internet due to minor errors with its connection.
You can power cycle your LG TV and WiFi router by unplugging them from their respective power outlets. You have to keep them unplugged for some time to make sure that the residual electrical charges stored inside them are drained.
Once you reintroduce electricity to their system and power them on, these devices should reboot in a refreshed state. This should fix any minor issues causing them not to work properly.
Follow these steps to power cycle your WiFi router:
| Difficulty | Very Easy ●○○○○ |
| Number of Steps | 2 |
| Duration | 35 seconds |
- Disconnect your WiFi router from the power/wall outlet.
- Plug it back in after 30 seconds of it being unplugged.
Note: Please ensure that its power cable is tightly plugged into the power/wall outlet.
Follow these steps to subject your LG TV to a power cycle:
| Difficulty | Very Easy ●○○○○ |
| Number of Steps | 4 |
| Duration | 1 minute and 5 seconds |
- Disconnect your LG TV from the power/wall outlet.
- Press/hold the power button on the LG TV itself.
- Wait for 30 seconds before letting go of that power button.
- Wait for 30 seconds again before you plug the LG TV back into the power/wall outlet.
Note: Please ensure that its power cable is tightly plugged into the power/wall outlet.
2: Reconfigure the LG TV location settings.
| Difficulty | Easy ●●○○○ |
| Number of Steps | 15 |
| Duration | 2 minutes |
The user reports state that setting the LG Service Country to automatic under the location settings results in a WiFi connectivity issue. As such, you should be able to address this problem by manually reconfiguring this by going to the settings menu.
Follow these steps to reconfigure the location settings on your LG TV:
on the remote to access the options panel on theside of your TV screen.
on the remote to access the options panel on theside of your TV screen after it reboots.
3. Reconfigure the time and date on your LG TV.
| Difficulty | Very Easy ●○○○○ |
| Number of Steps | 6 |
| Duration | 40 seconds |
Believe it or not, your LG TV can also experience WiFi connectivity issues due to incorrect time and date settings. The reason for this is that some online services and websites use real-time information to grant access to their products and resources.
This authorization method is used to prevent the exploitation of time-limited trials and demo versions of premium products and services.
Follow these steps to reconfigure the time and date on your LG TV:
on the remote to access the options panel on theside of your TV screen.
4. Download/install the latest LG TV software update.
| Difficulty | Easy ●●○○○ |
| Number of Steps | 14 |
| Duration | 10 minutes |
Installing the latest software is an effective way to solve software-related issues that are causing your LG TV to not connect properly to the WiFi network. The fastest way to do this is to download and install the update directly into your LG TV.
Unfortunately, this is impossible when you’re having network connectivity issues on your LG TV. As such, you can install the software update using the USB method instead to overcome this hurdle.
Follow these steps to install the latest LG TV software through a USB stick:
on the remote to access the options panel on theside of your TV screen.
Remember the LG TV model listed there.
Remember your LG TV’s current software version.
panel.
Select/click YES to install.
5. Run your LG TV through a factory reset.
| Difficulty | Easy ●●○○○ |
| Number of Steps | 6 |
| Duration | 10 minutes |
If the software update didn’t help with your network connectivity issues, you can always perform a factory reset as a last resort. Factory resetting your LG TV restores it to its default factory settings, which will wipe your account data, apps, and personal settings.
As it happens, the factory reset is also able to wipe corrupt files and viruses that might be infecting your LG TV.
Follow these steps to reset your LG TV to its initial settings:
on the remote to access the options panel on theside of your TV screen.
FAQs about LG TV WiFi Connectivity
Many solutions can be done to address the “WiFi is turned off” message that appears on an LG TV. Below is a rundown of troubleshooting tricks that you can perform to fix this issue.
• Double-check your WiFi connection and enter the correct WiFi password. Note: WiFi passwords are case-sensitive.
• Unplug and re-plug your WiFi router to refresh its internet connection.
• Restart your LG TV to refresh its system memory and correct minor bugs.
• Set the correct time and date on your LG TV.
• Reset your LG TV and restore its settings to the factory defaults.
• Contact your ISP about your internet connection problem to get assistance.
Switch to a wired connection by connecting your LG TV and your WiFi router using an ethernet cable. A wired connection is more stable and isn’t vulnerable to signal interference, unlike a wireless connection.
If the problem persists, reset your WiFi router until the WiFi connection becomes stable. You can contact your ISP to find out if the issue is due to a problem on their end and when the connection will return to normal.
Reset your WiFi router/modem if it doesn’t appear in the WiFi list. Make sure that it’s plugged in securely to the power/wall outlet.
If you’re using a 5.0 GHz frequency band, it needs to be closer to the TV for it to be detected due to its shorter signal range.
Connect to a mobile hotspot to identify the root cause of the internet problem. If your LG TV can connect to a mobile hotspot without any issues, you need to troubleshoot your WiFi modem/router.
If you’re LG TV can’t also connect to a mobile hotspot, you need to troubleshoot it to fix the issue of having no internet access.
